The correct use method of the electroplating solution filter

At the same time, there are many precautions before using the electroplating solution filter:

1. Before using the electroplating solution filter, we need to check whether there is any blockage or leakage in the pipeline. The pipeline and equipment need to be kept clean, and at the same time, check whether the valve is abnormal.

2. Check whether there is any loose connection between the bracket of the electroplating solution filter and some parts, and if so, it needs to be adjusted in time. For frequently used parts, it is necessary to ensure good lubrication.

3. Before the equipment is used, we need to check whether the piping is intact, and the entrance needs to be fixed without displacement.The installation method of the electroplating solution filter is very important, and many users ignore this point, which leads to frequent failures of the equipment and shortens the service life.

Before installing the electroplating solution filter, we need to do a good job of cleaning, first clean the inside and outside of the filter cartridge, and pay attention to the power supply and motor area can not touch the water. During installation, the pipe and flange joints need to be kept clean. Especially during the installation process, cutting plastic pipes is easy to produce debris, if it enters the inside, it will reduce the filtration precision of the electroplating filter, so it must be avoided.